TM 10--3510--221--24
0232 00--2
TOGGLE SWITCH REPLACEMENT -- Continued
0232 00
INSTALLATION
1. Remove nut (7) and lock washer (8) from new toggle switch (6).
2. Install toggle switch (6) onto door (9) then secure with nut (7) and lock washer (8).
3. Connect wires to toggle switch (6) as tagged.
4. Position cover (4) on standoffs (5) then secure with four screws (1), lock washers (2), and flat washers (3).
5. Turn handle (10) CW, then close door (9).
6. Secure door (9) to main control enclosure (11) by tightening eleven latches (12).
7. Position MAIN DISCONNECT switch (WP 0009 00, Figure 1, 1) to ON.
8. Position CONTROL POWER switch (3) to ON.
9. Verify CONTROL POWER lamp (4) is on.
END OF WORK PACKAGE