TM 10--3510--221--24
0230 00--2
LAMP SOCKET REPLACEMENT -- Continued
0230 00
INSTALLATION
1. Install lamp (11) and lens (10) onto new lamp socket (6).
2. Remove nut (7) and lock washer (8) from lamp socket (6).
3. Install lamp socket (6) onto door (9) then secure with nut (7) and lock washer (8).
4. Connect wires to lamp socket (6) as tagged.
5. Position cover (4) on standoffs (5) then secure with four screws (1), lock washers (2), and flat washers (3).
6. Turn handle (12) CW, then close door (9).
7. Secure door (9) to main control enclosure (13) by tightening eleven latches (14).
8. Position MAIN DISCONNECT switch (WP 0009 00, Figure 1, 1) to ON.
9. Verify MAIN POWER lamp (2) is on.
10. Position CONTROL POWER switch (3) to ON.
11. Verify CONTROL POWER lamp (4) is on.
END OF WORK PACKAGE
