TM 10--3510--221--24
0235 00--2
16 CHANNEL SSR PCB REPLACEMENT -- Continued
0235 00
INSTALLATION
1. Install three standoffs (11) onto new SSR PCB (2)
2. Insert two latch ejectors (12) into cable header (4).
3. Install SSRs (10) onto SSR PCB (2) as previously noted.
4. Install retaining bar (9), then secure with three thumb screws (8).
5. Position SSR PCB (2) onto panel (7), then secure with four screws (5) and lock washers (6).
6. Connect ribbon cable (3) to cable header (4).
7. Plug two wire headers (12) into SSR PCB (2).
8. Turn handle (13) CW, then close door (14).
9. Secure door (14) to main control enclosure (15) by tightening eleven latches (16).
10. Perform a test laundry cycle (TM 10--3510--221--10). Verify normal operation.
END OF WORK PACKAGE