TM 10--3510--221--24
0247 00--3/4 blank
CONTACTOR REPLACEMENT -- Continued
0247 00
INSTALLATION
1. Pull out on locking tab (12), then install new contactor (9) onto mounting rail (13).
2. Insert overload relay (10) into contactor (9), then secure by tightening three screw terminals (11).
3. Connect wires to contactor (9) and overload relay (10) as tagged.
4. Place door (2) onto inverter enclosure (3), then secure by tightening eleven latches (1).
5. Use maintenance menu control outputs function (WP 0010 00) to verify correct operation of dryer blower motor
MC104.
END OF WORK PACKAGE