TM 10--3510--221--24
0254 00--1
SUPPORT LEG ASSEMBLY REPLACEMENT
0254 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Washer, Lock (Item 20, WP 0275 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
REMOVAL
WARNING
Platform assembly must be properly supported prior to removing support leg. Never stand
or walk on platform when supports legs are not set--up and touching the ground. Failure to
follow these precautions could result in serious personnel injury or equipment damage.
1. Stow awning (1) and lower railing (2) (TM 10--3510--221--10).
2. Raise platform (3) until support legs (4) are slightly off of ground (TM 10--3510--221--10).
3. At support leg (4) to be replaced, pull quick--connect pin (5) securing support leg to platform (3).
4. Remove nut (6) and flat washer (7) then pull support leg (4) off of platform (3).
5. Remove screw (8), nut (9), and lock washer (10) from support leg (4).
1
3
4
2
