TM 10--3510--221--24
0255 00--2
WINCH CABLE REPLACEMENT -- Continued
0255 00
7
5
6
4
3
1
2
5
INSTALLATION
1. Thread cable (5) through two pulleys (7) and down to winch (4).
2. Insert cable (5) into hole on winch (4) then tighten setscrew (6).
3. Pull on cable (5) and ensure it is properly secured and does not slip out of setscrew (6).
CAUTION
Maintain a slight tension when winding up cable on winch. Also ensure cable is evenly
distributed across winch. Failure to follow these precautions may result in sudden drops of
platform during platform raising and lowering operations.
4. Use winch handle (3) to rotate winch (4) and cable (5) until shackle (1) can be hooked to u--bolt (2).
5. Hook shackle (1) to u--bolt (2).
6. Remove winch handle (3) from winch (4). Stow winch handle.
END OF WORK PACKAGE
