TM 10--3510--221--24
0256 00--1
TARP REPLACEMENT
0256 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
REMOVAL
1. Determine current configuration of LADS. If LADS is set--up for operation proceed to step 3. If LADS is in
transport configuration continue to step 2.
2. Set--up platform and railings (TM 10--3510--221--10, ASSEMBLY AND PREPARATION FOR USE procedures
steps A, B, C, and D1 and D2) then proceed to step 4.
3. Stow awning and remove awning supports (TM 10--3510--221--10, PREPARATION FOR MOVEMENT
procedures steps J1 through J9) then proceed to step 4.
4. Flip front half of tarp (1) back over front of LADS.
5. Remove four screws (2), flat washers (3), and nuts (4) then remove outer retaining plates (5).
6. Remove three screws (6), flat washers (7), and nuts (8) then remove center retaining plate (9).
7. Flip back half of tarp (1) back over front of LADS to expose awning extension (10).
8. Loosen six straps (11) securing awning extension (10) to tarp supports (12) and ISO frame (13).
9. Pull tarp (1) off of LADS.
