TM 10--3510--221--24
0265 00--3/4 blank
HEATER ASSEMBLY SERVICING --
Continued
0265 00
ASSEMBLY
1. Install access panel (14) onto burner chamber (15) then secure with twelve nuts (12) and flat washers (13).
2. Position access panel (10) onto middle chamber (11) then secure with ten screws (9).
3. Position access panel (8) onto outer chamber (6) then secure with twelve screws (7).
4. Position flue stack (3) onto outer chamber (6) then secure with eight screws (4) and flat washers (5).
5. Insert exhaust duct (2) into flue stack (3), then tighten clamp (1).
6. Install burner assembly (WP 0182 00).
END OF WORK PACKAGE