TM 10--3510--221--24
0010 00--11/12 blank
LAUNDRY ADVANCED SYSTEM
MAINTENANCE MENU OPERATION -- Continued
0010 00
D. OTHER OPTIONS -- Continued
4. Press appropriate MENU SELECTION switch as follows:
a. Select PREVIOUS SENSOR to toggle to previous sensor.
b. Select NEXT SENSOR to toggle to next sensor.
c. Select CALIBRATE SENSOR to perform calibration of displayed sensor. Proceed to step 5.
d. Select RETURN to exit calibrate analog sensors menu and return to step 1.
5. Monitor display, it should read:
CALIBRATE ANALOG SENSORS
INCREASE SIGNAL
DECREASE SIGNAL
RETURN
LT100A = 1.50V = 0 GALS
6. Press appropriate MENU SELECTION switch as follows:
a. Select INCREASE SIGNAL to increase displayed parameter.
b. Select DECREASE SIGNAL to decrease displayed parameter.
c. Select RETURN to accept changed parameters. Return to step 4.
END OF WORK PACKAGE
