TM 10--3510--221--24
0010 00--7
LAUNDRY ADVANCED SYSTEM
MAINTENANCE MENU OPERATION -- Continued
0010 00
C. CONTROLLING OUTPUTS --Continued
10. After operational check is completed press MENU SELECTION switch to close valve. Return to step 8.
11. Monitor display, it should read:
CNTRL DISCR OUTS
CONTROL OTHERS
TEST SYSTEMS
RETURN
12. Press appropriate MENU SELECTION switch as follows:
a. Select CNTRL DISCRT OUTS to control discrete outputs. Proceed to step 13.
b. Select TEST SYSTEMS to control air or heating system operation. Proceed to step 17.
c. Select RETURN to exit control others menu and return to step 2.
13. Monitor display, it should read:
CONTROL DISCRETE OUTPUTS
DN100A= OFF
OUTPUT ON
PREVIOUS OUTPUT
NEXT OUTPUT
RETURN
14. Press appropriate MENU SELECTION switch as follows:
a. Select PREVIOUS OUTPUT to toggle to previous device.
b. Select NEXT MOTOR to toggle to next device.
c. Select OUTPUT ON to turn on displayed device.
d. Select RETURN to exit control discrete outputs menu and return to step 12.
15. Monitor display, it should read:
CONTROL DISCRETE OUTPUTS
DN100A= ON
OUTPUT OFF
16. After operational check is completed press MENU SELECTION switch to turn off device.
17. Monitor display, it should read:
TEST SYSTEMS
START HEATING SYS
START AIR SYSTEM
RETURN
18. Press appropriate MENU SELECTION switch as follows:
a. Select START HEATING SYS to test heating system.
b. Select START AIR SYSTEM to test air system.
c. Select RETURN to exit test systems menu and return to step 12.
