TM 10-3510-222-24
2-33. AIR MANIFOLD - continued.
c. REPAIR
Repair consists of replacing damaged or missing components of the air manifold.
d. ASSEMBLY
NOTE
Apply antiseize compound to all male threads (except flare fitting side of the adapters) before
installing piping.
(1) Install adapter (22) on pipe cross (23).
(2) Install adapter (21) on pipe cross (23).
(3) Install adapter (20) on pipe cross (23).
(4) Install nipple (19) on pipe cross (23).
(5) Install pipe cross (18) on nipple (19).
(6) Install adapter (17) on pipe cross (18).
(7) Install adapter (16) on pipe cross (18).
(8) Install nipple (15) on pipe cross (18).
(9) Install tee (14) on nipple (15).
(10) Install adapter (13) on tee (14).
(11) Install adapter (12) on tee (14).
e. INSTALLATION
(1) Position air manifold (24) on control panel (25).
(2) Install two plates (11), four lockwashers (10) and nuts (9).
(3) Install hose (8) on adapter (13).
(4) Install hose (7) on adapter (12).
(5) Install five hose clamps (1) on air hoses (2, 3, 4, 5 and 6). Do not tighten.
(6) Install air hoses (2, 3, 4, 5 and 6) on air manifold (24).
(7) Position five hose clamps (1) over adapters (12, 13, 16, 17, 20 and 21) and tighten.
2-87
