TM 10-3510-222-24
2-50. BLOWER.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment (App B, Item 2)
Materials/Parts
Tags (App D, Item 4)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Remove Nonmetallic Hoses (Fuel Lines) (Para 2-43)
Personnel Required
Two
General Safety Instructions
WARNING
Voltage in this equipment is high enough to cause
serious injury or death. Do not perform this task with
power on.
a.
REMOVAL
(1)
Remove two screws (1) and plate (2) from motor (9).
NOTE
It is not necessary to remove wire nut, combining motor wires T5, T6 and T7.
(2)
Tag and disconnect wires from motor (9).
(3)
Unscrew nut (3) from elbow (4) and remove wires from motor (9).
(4)
Remove screw (5), lockwasher (6) and clamp (7).
(5)
Loosen hose clamp (8).
(6)
Support blower assembly (12) and remove four screws (10), lockwashers (11) and blower assembly (12).
b.
REPAIR
Repair consists of replacement of fan and motor (Para 2-64), shutter assembly (Para 2-51) and repair of
rotary pump (Para 2-53).
c.
INSTALLATION
(1)
Position blower assembly (12) on mounting bracket of dryer and secure with four screws (10) and
lockwashers (11).
(2)
Tighten hose clamp (8).
(3)
Feed wires through elbow (4) into motor (9).
(4)
Install elbow (4) and nut (3) onto motor (9).
2-120
