TM 10-3510-222-24
2-48. FLUID FILTER.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Materials /Parts
Gasket (App C, Item 30)
Antiseize Tape (App D, Item 17)
Parts Kit (App C, Item 31)
Equipment Condition
Dryer shut down (TM 10-3510-222-10)
Nonmetallic hoses (fuel lines) disconnected from filter
(Para 2-43)
General Safety Instructions
WARNING
Fuel is toxic and flammable. Avoid contact and
breathing of fuel vapors. If fuel is spilled accidentally,
wipe up spills as much as possible to avoid fire
hazard.
a.
REMOVAL
(1)
Remove two nuts (1), lockwashers (2), flat washers (3), screws (4) and filter (7).
(2)
Remove adapters (5 and 6) from filter (7).
(3)
If required, remove two nuts (8), lockwashers (9), flat washers (11), screws (10) and filter bracket (12).
b.
REPAIR
(1)
Disassembly.
(a)
Remove four screws (13).
(b)
Remove retaining ring (14), bowl (15) and gasket (16) from filter head (17).
(2)
Assembly.
Position gasket (16), bowl (15) and retaining ring (14) on filter head (17) and install six screws
(13).
c.
INSTALLATION
(1)
If removed, install bracket (12) with two screws (10), flat washers (11), lockwashers (9) and nuts (8).
(2)
Apply antiseize tape to smaller threads of adapters (5 and 6) and install on filter (7).
(3)
Position filter (7) on bracket (12) and secure with two lockwashers (2), flat washers (3), screws (4) and
nuts (1).
2-116
