TM 10-3510-222-24
2-47. BRACKET ASSEMBLY (NONMETALLIC HOSE).
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Item 1)
Dryer shut down (TM 10-3510-222-10)
a.
REMOVAL
(1)
Remove screw (1), lockwashers (2), flat washers (3) and clamp (4).
(2)
Remove two nuts (5), lockwashers (6), screws (7) and bracket (8).
b.
REPAIR
Repair consists of replacing damaged or missing components of the bracket assembly.
c.
INSTALLATION
(1)
Position bracket (8) on dryer and secure with two screws (7), lockwashers (6) and nuts (5).
(2)
Position hose line on bracket (8) and install clamp (4), two flat washers (3), lockwasher (2) and screw (1).
Figure 2-36. Bracket Assembly (Nonmetallic Hose)
2-115
