TM 10-3510-222-24
2-73. TIEDOWN.
This task covers:
Repair
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Item 1)
Tiedown removed (TM 10-3510-222-10)
Materials/Parts
Wire Rope (App C, Item 58)
Sleeve (App C, Item 57)
REPAIR
NOTE
Both tiedowns are identical, this procedure is for one of them.
(1)
Wire rope (2) and/or bolt (3) (one side).
(a)
Remove wire rope (2) from bolt (3) and tiedown angle (4).
(b)
Measure and cut wire rope (2) to 14 inches long.
(c)
Install wire rope (2) and sleeve (1) on tiedown angle (4).
(d)
Install wire rope (2) and sleeve (1) on bolt (3).
(2)
Tiedown angle (4).
(a)
Remove wire rope (2) from both sides of tiedown angle (4).
(b)
Install wire rope (2) on both sides of tiedown angle (4).
Figure 2-63. Tiedown
2-166
