TM 10-3510-222-24
3-23. DOOR AND BAR.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Materials/Parts
Plumbing Fixture Setting Compound
(App D, Item 20)
Gasket (App C, Item 33)
Gasket (App C, Item 37)
Adhesive (RTV) (App D, Item 1)
a.
REMOVAL
(1)
Remove four screws (1) and flat washers (2) from washer (3).
(2)
Remove door and bar (4) and shim (5).
b.
REPAIR
(1)
Latch handle (6).
(a)
Remove screw (7) and handle stop (8) from block (9).
(b)
Remove four screws (10) from block (9) and bar (11).
(c)
Remove latch handle (6) from bar (11).
(d)
Remove set screw (12) from block (9).
(e)
Remove screw (13), washer (14), bushing (15), handle (6) and washer bearing (16) from block (9).
(f)
Remove set screw (17), screw (18) and bushing (19) from handle (6).
(g)
Install bushing (19), screw (18) and set screw (17) on handle (6).
(h)
Install washer bearing (16), handle (6), bushing (15), washer (14) and screw (13) on block (9).
3-36
