TM 10-3510-222-24
3-29. CONTROL CONSOLE.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 3)
Materials/Parts
Sealing Washer (5) (App C, Item 64)
Adhesive (RTV) (App D, Item 1)
Tag (App D, Item 4)
Gasket (App C, Item 78)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
General Safety Instructions
WARNING
High
voltage
is
present
on
this
equipment. Do not perform maintenance
with power on. Death or serious injury
may result.
a.
REMOVAL
(1)
Remove twelve screws (1) and cover (2) from washer control console (3).
(2)
Tag and remove five air hoses (4) from washer control console (3).
(3)
Remove air hose (5) from adapter (6).
(4)
Remove air hose (7) from adapter (8).
(5)
Remove hose (9) from pressure switch (10).
(6)
Remove nut (11), seal (12) and connector (13). Discard seal (12).
(7)
Tag and remove electrical wiring (power in) and remove nut (14), seal (15) and connector (16). Discard
seal (15).
(8)
Tag and remove electrical wiring (motor) and remove nut (17), seal (18) and connector (19). Discard
seal (18).
(9)
Tag and remove electrical wiring (level sensor) and remove nut (20), seal (21) and connector (22).
Discard seal (21).
(10)
Tag and remove electrical wiring (door lock) and remove nut (23), seal (24) and 90° connector (25).
Discard seal (24).
(11)
Remove four nuts (26), lockwashers (27) and flat washers (28).
(12)
Remove washer control console (3) and four washers (29) from control stand (30).
b.
REPAIR
NOTE
Repair consists of replacing damaged or missing components on the control console.
(1)
Pressure switch (10).
(a)
Remove twelve screws (1) from cover (2) and remove cover (2).
3-60
