TM 10-3510-222-24
3-29. CONTROL CONSOLE - continued.
(b)
Remove hose (9) from pressure switch (10).
(c)
Remove screw (40) from bracket (41) and pressure switch (10).
(d)
Remove pressure switch (10).
(e)
Position new pressure switch (10) on bracket (41) and install screw (40).
(f)
Install hose (9) on pressure switch (10).
(g)
Position cover (2) on washer control console (3) and install twelve screws (1).
(2)
Solenoid valve (42).
NOTE
All five solenoid valves are identical. This procedure is for one of them.
(a)
Remove twelve screws (1) from cover (2) and remove cover (2).
(b)
Remove four nuts (43), lockwashers (44) and two rods (45).
(c)
Remove hose clamp (46) and hose (47) from adapter (48).
(d)
Remove hoses (4).
(e)
Remove solenoid valve(s) (42).
(f)
Remove adapters (48 and 49).
(g)
Remove plug (50).
(h)
Install plug (50).
(i)
Position new solenoid valve(s) (42) on washer control console (3) and install two rods (45), four
lockwashers (44) and nuts (43).
(j)
Install adapters (48 and 49).
(k)
Install hose clamp (46) on hose (47) and adapter (48) and tighten hose clamp (46).
(1)
Position cover (2) on washer control panel (3) and install twelve screws (1).
(3)
Gasket(s) (51).
(a)
Remove gasket (51) from control console (3).
(b)
Remove adhesive (RTV) from control console (3).
(c)
Using old gasket (51) as a guide, cut out new gasket (51).
(d)
Apply RTV on control console (3).
(e)
Place gasket (51) on control console (3).
(4)
Cover (32).
(a)
Remove five screws (31) from cover (32).
(b)
Remove cover (32) and spacer (33).
(c)
Position spacer (33), new cover (32) on washer control console (3) and install five screws (31).
3-63
