TM 10-3510-222-24
3-41. LAUNDRY EXTRACTOR.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment (App B,
Item 2)
Automotive Vehicle Shop Equipment (App B,
Item 3)
Electrical Repair Shop Equipment (App B, Item 4)
Suitable Lifting Device
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Water hose disconnected from extractor
(TM 10-3510-222-10)
Power input wires/conduit disconnected from
extractor (Para 3-35)
Personnel Required
Two
General Safety Instructions
WARNING
Extractor weighs 609 lbs and requires
a lifting device for removal and
installation. Attempt to remove or
install Laundry Extractor without a
lifting device may result in injury to
personnel
a. REMOVAL
(1) Remove five nuts (1), lockwashers (2), screws (3) and flat washers (4).
(2) Remove three nuts (5), lockwashers (6), bolts (7), sleeves (9) and flat washers (8).
(3) Using a suitable lifting device, remove extractor (10) from Laundry Unit.
b. REPAIR
NOTE
Extractor repairs are covered in Paragraphs 3-42 thru 3-57.
c. INSTALLATION
(1) Using a suitable lifting device, position extractor (10) on Laundry Unit.
(2) Install three sleeves (9), flat washers (8), bolts (7), lockwashers (6) and nuts (5).
(3) Install five flat washers (4), screws (3), lockwashers (2) and nuts (1).
(4) Power input wires/conduit connected to extractor (Para 3-35).
3-95
