TM 10-3510-222-24
3-49. LID CLOSED SWITCH - continued.
(2)
If stud (7) is level, but switch (5) is positioned too high to sufficiently depress switch actuator (9), or switch is
depressed too much, loosen screws (1) and move switch plate (9) up or down for correct adjustment.
(3)
If stud (7) is not level, loosen setscrew (10) on cam (8) and rotate cam until stud (7) is level when lid is closed.
Tighten setscrew (10) and restart adjustment procedure at step 1.
(4)
Install cover (Para 3-42).
Figure 3-44. Lid Closed Switch
3-117
