TM 10-3510-222-24
3-61. STARTER MOTOR.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Materials/Parts
Tags (App D, Item 4)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Shield removed (Para 2-71)
General Safety Instructions
WARNING
Voltage in this equipment is high enough
to cause serious injury or death. Do not
perform this task with power on.
a.
REMOVAL
(1)
Tag and disconnect wires from starter motor (3).
(2)
Remove screws (1), washers (2) and starter motor (3).
(3)
As required, remove screws (4) and heaters (5).
b.
INSTALLATION
(1)
Position starter motor (3) on dryer base and secure with four screws (1) and lockwashers (2).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-4 Dryer Wiring Diagram, may be used to connect wires if tags are lost or illegible.
(2)
Connect wires as tagged.
NOTE
Hold reset button down while installing heaters.
(3)
As required, install heaters (5) with screws (4).
(4)
Install shield (Para 2-71).
3-142
