TM 10-3510-222-24
3-63. ON/OFF SWITCH.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Materials/Parts
Tags (App D, Item 4)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
General Safety Instructions
WARNING
Voltage in this equipment is high enough to cause
serious injury or death. Do not perform this task
with power on.
a.
REMOVAL
CAUTION
Care must be exercised when panel is opened to prevent strain on wiring connected to electrical
components on panel. Complete removal of panel is possible only after wires are disconnected.
(1)
Remove six screws (1), lockwashers (2) and open panel (3).
(2)
Tag and disconnect wires from switch assembly (6).
(3)
Remove three screws (4), lockwashers (5) and switch assembly (6).
b.
INSTALLATION
(1)
Position switch assembly (6) on dryer and secure with three lockwashers (5) and screws (4).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-4 Dryer Wiring Diagram, may be used to connect wires if tags are lost or illegible.
(2)
Connect wires as tagged.
(3)
Position panel (3) on unit and secure with six screws (1) and lockwashers (2).
3-146
