TM 10-3510-222-24
3-73. HEATER - continued.
(i)
Position the pipes on pipe assembly (6) on box (5) using the heat exchanger installation kit.
NOTE
Ensure rope gasket makes a complete seal around the outside edge of the pipe assembly.
(j)
Install 3/8" rope gasket (4) and cover (3) on pipe assembly (6) with four screws (1) and lockwashers
(2).
c.
INSTALLATION (Figure 3-70)
WARNING
Heater assembly is heavy and requires four people to lift. Attempts to lift alone may cause injury.
(1)
Position heater assembly (20) on top of dryer.
(2)
Position cover (19) on top of heater (20).
(3)
Secure cover (19) to dryer with two flat washers (18), lockwashers (17) and screws (16) and two lockwashers
(15), screws (14) and nuts (13).
(4)
Install plate (12) and secure with four screws (9), lockwashers (10) and flat washers (11).
(5)
Install six screws (7) and lockwashers (8) making sure ground strap (21) is also secured on front cover (6).
(6)
Position front cover (6) on cover (19) and secure with nineteen lockwashers (5) and screws (4).
(7)
Position rear cover (3) on cover (19) and secure with twenty lockwashers (2) and screws (1).
(8)
Install blower and burner assembly (Para 3-70).
(9)
Install screen (Para 3-75).
(10)
Install beams and baskets (Para 2-13 to 2-17).
3-173
