TM 10-3510-222-24
3-74. HEATER BASE
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
General Safety Instructions
General Mechanics Tool Kit (App B, Item 1)
WARNING
Equipment Condition
Be sure power to dryer is off at circuit breaker panel.
Accidental start of dryer while performing this task
Laundry Unit shut down (TM 10-3510-222-10)
could cause injury.
Heater Assembly removed (Para 3-73)
a.
REMOVAL
(1)
Remove four screws (1), lockwashers (2) and flat washers (3).
(2)
Remove four screws (4), lockwashers (5) and flat washers (6).
(3)
Remove base (7) from cylinder assembly (8).
b.
INSTALLATION
(1)
Position base (7) on cylinder assembly (8).
(2)
Install four flat washers (6), lockwashers (5) and screws (4).
(3)
Install four flat washers (3), lockwashers (2) and screws (1).
(4)
Install heater assembly (3-73).
Figure 3-72. Heater Base
3-174
