TM 10-3510-222-24
3-76. TUMBLER BARREL.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Trailer Mounted Welding Shop (App B, Item 8)
Materials /Parts
Safety Wire, .0625 Dia (App D, Item 21)
Personnel Required
Four
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Platform Anchor removed (Para 2-20)
General Safety Instructions
WARNING
Be sure power to dryer is off at circuit breaker
panel. Accidental start of dryer, while performing
this task could cause injury.
a.
REMOVAL
NOTE
Clamp may be one or two pieces.
(1)
Remove two nuts (1), lockwashers (2), screws (3), clamp(s) (4) and front cover plate (5).
(2)
Remove three screws (6), lockwashers (7) and cover plate (8).
(3)
Cut safety wire on screws (9) and remove two screws (9), flat washers (10) and retaining plate (11).
(4)
Loosen setscrew (12) on sprocket (17) of trunnion assembly (18).
WARNING
Tumbler barrel is heavy/difficult to handle. To prevent injury, use two people to lift.
(5)
Remove tumbler barrel (13) from dryer cylinder (16).
(6)
Remove key (14) from shaft (15).
3-176
