TM 10-3510-222-24
3-77. CYLINDER.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Personnel Required
Two
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Tumbler Barrel removed (Para 3-76)
Heater Assembly removed (Para 3-73)
Heater Base removed (Para 3-74)
General Safety Instructions
WARNING
Dryer cylinder is heavy and requires two people to
lift.
a.
REMOVAL
(1)
Remove three screws (1) and lockwashers (2).
(2)
Remove fourteen nuts (3), lockwashers (4), screws (5) and flat washers (6).
(3)
Remove four screws (7), flat washers (8), lockwashers (9) and plate (10).
(4)
Remove dryer cylinder (11) from dryer base (12).
b.
INSTALLATION
(1)
Position cylinder (11) on base of dryer (12).
(2)
Position plate (10) on inside of cylinder (11) and install four lockwashers (9), flat washers (8) and screws (7).
(3)
Install fourteen flat washers (6), screws (5), lockwashers (4) and nuts (3).
(4)
Install three screws (1) and lockwashers (2).
(5)
Install tumbler barrel (Para 3-76).
(6)
Install heater base (Para 3-74).
(7)
Install heater assembly (Para 3-73).
3-180
