TM 10-3510-222-24
2-19. REAR FRAME - continued.
c.
INSTALLATION
(1)
If tarpaulin frame support(s) (3) was removed, install bolt (4), spacer (2), lockwasher (13) and nut (14) on
tarpaulin frame support (3) and rear frame (1).
NOTE
Shims may be used to achieve 90° between rear frame and trailer if needed.
(2)
Position and support rear frame (1) on Laundry Unit.
(3)
Install twelve bolts (12), flat washers (10), lockwashers (9) and nuts (8) on rear frame (1) and Laundry Unit.
(4)
Install bolt (11), lockwashers (7) and nut (6) on tarpaulin frame support (3) and Laundry Unit.
(5)
Install right beam (Para 2-15).
(6)
Install center beam (Para 2-16).
(7)
Install platform anchor (Para 2-20).
2-51
