TM 10-3510-223-13&P 0009 00 CONTAINERIZED SELF SERVICE LAUNDRY (CSSL)  MODEL A PREVENTIVE MAINTENANCE CHECK AND SERVICES (PMCS) 0009 00-1 THIS SECTION COVERS: Introduction, PMCS Procedures INITIAL SETUP: CSSL set up but not in operation Materials/Parts Maintenance Level   Rags (WP 0072, Table 1, Item 1) Operator/Unit Light Fluorescent Gen Purp. (WP 0072, Table 1, Item 2) Tools and Special Tools   None INTRODUCTION Preventive Maintenance Checks and Services (PMCS) are performed to keep the CSSL and its associated equipment in good operating condition. The checks are used to find, correct, or report problems.  Operator personnel are to do the PMCS jobs as shown in the PMCS table. PMCS are done every day the CSSL is operated, using the PMCS table. Pay attention to WARNING and CAUTION statements. A WARNING means someone could be hurt. A CAUTION means equipment could be damaged. Before you begin using the CSSL, do Before PMCS During use of the CSSL, do During PMCS After using the CSSL, do After PMCS Once a week, do Weekly PMCS if the CSSL has been in use Do Monthly PMCS once a month if the CSSL has been in use If you find something wrong when performing PMCS, fix it using troubleshooting and/or maintenance procedures. The right-hand column of the PMCS table lists conditions that make the CSSL not fully mission capable. Write up the faults that cannot be repaired on DA Form 2404 for unit maintenance. For further information on how to use this form, see DA PAM 738-750. If tools that are required to perform PMCS are not listed in procedures, notify your supervisor. INSPECTION Look for signs of trouble. Senses help here. You can feel, smell, hear, or see many problems that can be eliminated before they get worse.  Inspect to see if items are in good condition. Are components correctly installed and secured? Is any damage to the frame or components visible? Correct any faults or notify unit maintenance. ASSOCIATED COMPONENTS Perform PMCS on the TEMPER Section, freshwater pump, 3,000 Gallon fabric tanks, general cargo container, 100 AMP power supply cable and pigtail in accordance with the publications specified in work package 0044.