TM 10-3510-223-13&P
0035 00
0035 00-5
Connect the water line at the union fitting (1). Use antiseize tape on threaded portions. Align the tank with
the angle brackets (2) and install six hex cap screws, lock washers, and flat washers (3) through the
angle brackets (2) on the mounting plate (4) into the inserts on the pressure tank. Install the support
bracket (5) with four self-locking nuts and washers (6). Install strap (7) onto the tank and tighten cap
screw (8).
1
2
3
4
5
6
7
8
