TM 10-3510-223-13&P
0042 00
CONTAINERIZED SELF SERVICE LAUNDRY (CSSL) MODEL A
DIRECT SUPPORT MAINTENANCE
0042 00-1/2 Blank
VENTILATION FAN
THIS SECTION COVERS:
Test, Repair, Replace
INITIAL SETUP
CSSL not in operation
Maintenance Level
Direct Support
Tools and Special Tools
Materials/Parts
Tool Kit, Org. Maintenance Common No.1
(WP 0045, Table 2, Item 2)
Wiping Rags (WP 0072, Table 1, Item 1)
WARNING
This equipment operates at High Voltages. Use extreme caution.
Observe all warnings, and follow all safety procedures. Touching a live
wire can cause serious injury or death.
TEST
Isolate electrical malfunction of the ventilation fan as described in Procedure 2 of the Direct Support
Troubleshooting Procedures contained in work package 0029.
REPAIR
Before repairing the vent fan, set circuit breaker #22 on power distribution panel #1 to OFF, and
disconnect the power cord from the receptacle. Repair the vent fan by replacing the power cord as
described in work package 0074, Figure 3.
REPLACE
NOTE
Prior to installation, modify the ventilation fan as described in work
package 0074, Figure 3.
Replace the ventilation fan by following the removal and installation procedures in work package 0005 00.
Set circuit breaker #22 on power distribution panel #1 to ON.
END OF WORK PACKAGE
