TM 10-3510-223-13&P 0005 00
0005 00-46
To prepare the TEMPER section for movement, follow the procedures outlined. Clean and dry tent fabric
sections and equipment as described in below. Package the tent frame pieces into the TEMPER frame
section cover assembly.
CAUTION !
Use caution when closing CSSL doors to avoid damage to lights.
CSSL doors are heavy and can break lights .
Striking procedures. First, locate the frame section cover and the light set storage container, close the
personnel double doors, then proceed as follows:
Have two soldiers on top of container loosen the bootwall lines (1) to the upper ISO fittings (2) at the
opposite end of the container. Have two soldiers on ground remove tent stakes (4) from the lower end (3)
of the bootwall.
Fold bootwall back towards TEMPER section and coil bootwall lines (1) .
Have a soldier on the ground unplug power cord (5) used for TEMPER interior lights from the container
power panel. Disconnect from lights, coil cable, and place in CSSL footlocker.
2
2
1
3
4
5
