TM 10-3510-224-13&P
0036 00
11. Place the new float switch (12) into the tank.
12. Install the worm gear clamp (11) securing the float switch (12) to the sump pump discharge pipe (13).
13. Install the two hex bolts into the sump pump mounting flange (14).
14. Feed the float switch cord (4) through opening (10) in the wastewater tank cover.
15. Place the wastewater tank cover (9) into position and re-install the hardware (6), (7) and (8) to secure the cover.
16. Thread the float switch cord up through the wall mounted cable bracket (5) and into the junction box.
17. Re-connect the float switch cord (4) inside the junction box on the side wall.
18. Re-install the junction box wall plate (3) using the retained hardware (2).
19. Tighten the screw on the front of the wire retainer bracket (1).
1
2
3
4
5
6
7
8
10
11
12
9
13
14
END OF WORK PACKAGE
0036 00-4
