TM 10-3510-224-13&P
0038 00
REPLACE
Washer Removal.
1. Prior to replacing a washer/dryer, open the side double service doors on the container to gain access to the rear of
the washer/dryer.
2. Ensure that the machine to be replaced is empty of water and clothing items.
3. Turn OFF the appropriate circuit breaker for the machine to be replaced.
4. Turn off the water supply valve (1) for the machine to be replaced.
5. Unplug the twist lock connector (2) from the overhead raceway (3).
6. Remove and retain the hardware (4) securing the front panel (5).
7. Remove and retain the bolt (6) securing the washer to the frame (7).
8. Slide the washer forward until it reaches the front stops on the frame (7).
9. Remove and retain the wastewater hose (8) and clamp (9).
10. Reach over the top of the washer and disconnect the 50 pin connector (10).
11. Disconnect the “Y” water connection (11) on the back of the washer.
12. Lift the washer up over the stop and remove it from the frame.
1
2
3
4
5
6
8
9
10
11
7
0038 00-3
