TM 10-3510-224-13&P
0038 00
Washer Drive Belt.
1. Lay the washer on its front for access. Loosen the water pump and remove the water pump belt as described
above.
2. Remove the broken drive belt (1) from the drive (2) and drum pulleys (3).
3. Move the motor on its track to obtain sufficient slack.
4. Place a new belt on the drive (2) and drum (3) pulleys.
5. Adjust the motor on its track to tighten the drive belt.
6. Tighten the motor.
7. Re-install the water pump belt (4) and adjust as described above.
8. Tighten the water pump after adjusting the pump belt.
¼” Clearance
1
2
3
1
3
2
4
Pump Belt
Drive Belt
0038 00-2
