TM 10-3510-224-13&P
0038 00
12. Connect the water supply hose to the water line (11).
13. Slide the washer part way in and feed the wastewater hose (12) through from the back to the front of the washer.
14. Connect the wastewater hose (12) using the retained clamp (13).
15. Push the washer all the way back into the frame.
16. Bolt the washer to the floor using the retained bolt (14) in the right front corner of the frame.
17. Secure the front panel (6) to the washer using the retained screws (15).
18. Place the top frame (16) on top of the washer dryer assembly.
19. Secure the top frame to the dryer (17) using the retained hardware (18).
20. Secure the frame to the wall mount (19). Using the retained hardware.
21. Connect the 15 pin electrical connector (20).
22. Plug the power cord (21) into the overhead raceway (22).
END OF WORK PACKAGE
0038 00-6
15
14
6
9
12
13
10
8
7
11
20
16
17
18
19
21
22
