TM 10-3510-226-23
UNIT MAINTENANCE
CONTAINERIZED BATCH LAUNDRY (CBL)
NSN 3510-01-527-2209
NSN 3510-01-527-2210
SERVICE UPON RECEIPT
SERVICE UPON RECEIPT
Introduction
NOTE
Maintenance programs must be followed in the applicable technical manuals. It is very
important to adhere to maintenance procedures in order to prolong the service life of
these items.
This TM contains Unit Maintenance procedures applicable to the CBL as authorized by the Maintenance
Allocation Chart (MAC) in Work Package 0086 00 of this manual. Refer to associated equipment
technical manuals for item-specific maintenance instructions (refer to Work Package 0084 00 for technical
manual information). All maintenance instructions covered in this Work Package are unique to the CBL.
All maintenance procedures in this Work Package can be performed by one person unless otherwise
indicated. Read all WARNINGS, CAUTIONS, and NOTES carefully before attempting any procedures.
This includes the warnings at the front of this manual.
Unit Maintenance Work Packages begin with a header specifying the applicable equipment, the item
being maintained, and what the maintenance action entails. This is followed by a chart specifying the
initial setup of the equipment before starting maintenance, the tools required to perform the maintenance,
any materials or parts required, and the number of MOS specific personnel required. Maintenance items
which do not list an MOS for the task are non-MOS specific Maintenance items.
Unit Maintenance tasks may be performed by Unit Maintenance, Direct Support, General Support, or
Depot personnel.
UNIT SERVICE UPON RECEIPT
Unpacking from Shipment and Inspection
1.
Inspect equipment for damage incurred during shipment. If the equipment has been damaged, report
the damage on DD Form 6, Packaging Improvement Report.
2.
Check equipment against the packing slip to verify the shipment is complete. Report all
discrepancies in accordance with the instructions of DA PAM 738-751.
3.
Check to see whether the equipment has been modified.
4.
After equipment has been positioned in the recommended operational floor plan, check all items
requiring service and perform Preventive Maintenance Checks and Services (Refer to WP 0014 00).
