TM 10-3510-226-23
0036 00
REPLACE-CONTINUED
13. Use a wrench to remove the screws retaining the pump casing (Figure 14, Item 17), and remove the
pump casing.
14. Remove the impellor (Figure 14, Item 20) by unscrewing the impellor from the shaft (Figure 14, Item
19).
15. Remove the spring and seal face (Figure 14, Item 21) from the shaft (Figure 14, Item 19).
16. Remove machine screws retaining motor (Figure 14, Item 25) to seal plate (Figure 14, Item 23), and
remove motor.
17. Install replacement motor (Figure 14, Item 25) onto seal plate (Figure 14, Item 23), and retain with
machine screws.
18. Install the replacement impellor (Figure 14, Item 20) and retain with screw.
19. Install the pump casing (Figure 14, Item 17) and retain with screws.
23
19
21
20
17
25
Figure 14. Replace the Pump Motor.
0036 00-23
