TM 10-3510-226-23
0056 00
REPLACE-CONTINUED
14. Remove screws retaining junction box (Figure 6, Item 8) cover to replacement motor (Figure 6, Item
11) and remove cover.
15. If necessary, knock out plug from conduit penetration on replacement motor (Figure 6, Item 11).
16. Install conduit (Figure 6, Item 9) into junction box (Figure 6, Item 8) on replacement motor (Figure 6,
Item 11), and retain with locknut.
17. Connect wiring to motor (Figure 6, Item 11) and to the motor fan (Figure 6, Item 7) as tagged.
18. Install motor junction box (Figure 6, Item 8) cover and retain with screws.
Figure 6. Replace the Washer Motor.
0056 00-8
