TM 10-3510-226-23
0056 00
REPLACE
Replace the Washer Motor
WARNING
Ensure that all electrical power is shut off and disconnected before proceeding. The
Circuit Breaker box should be locked by personnel following this procedure. Serious
injury or death can result from electrocution if proper safety precautions are not observed.
WARNING
The washer is extremely heavy. Use caution when lifting and blocking the washer, and
do not allow unnecessary personnel in the immediate area while it is being moved.
Serious injury or death may result if safety precautions are not observed.
CAUTION
The washer is a large, heavy piece of machinery being moved out of a confined space.
Before removal and installation, remove or protect any equipment that might be damaged
by the washer on its way in or out.
1. Remove washer IAW procedures given in WP 0041 00.
2. Adjust and tighten locknuts (Figure 2, Item 3) on adjustment bolt as necessary to relieve tension on
belt.
3. Remove belt (Figure 2, Item 4) from pulley (Figure 2, Item 5).
4. Remove the reuse drain line (Figure 2, Item 6) from the reuse drain valve.
5. Disconnect motor fan (Figure 2, Item 7) leads.
0056 00-3
