TM 10-3510-226-23
0056 00
REPLACE-CONTINUED
WARNING
The washer motor is heavy approximately 70 lbs - and located in a very confined
space. Use caution when lifting the motor. Two persons are required to lift and remove
the motor from the washer. Serious injury may result if safety precautions are not
observed.
9. Fasten two 1-inch straps (Figure 4, Item 10) to both drum support rails, looping under the motor
(Figure 4, Item 11). Space the straps evenly and tighten straps.
10. Remove bolts, washers, and nuts securing motor (Figure 4, Item 11) to motor mount (Figure 4, Item
12), and slowly release the strap (Figure 4, Item 10) to remove motor. Leave the strap(s) in place.
12
10
11
11
Figure 4. Replace the Washer Motor.
11. Remove pulley (Figure 5, Item 5) from motor (Figure 5, Item 11) and install the pulley on the
replacement motor.
12. Lay the replacement motor (Figure 5, Item 11) onto the strap(s) (Figure 5, Item 10) and tighten the
strap(s) to lift the motor into place.
13. Install replacement motor (Figure 5, Item 11) onto motor mount (Figure 5, Item 12) and retain with
bolts, washers, and nuts.
0056 00-6
