TM 10-3530-207-14
2-18. PREPARATION FOR MOVEMENT - continued.
f.
Disassembly of Button Sewing Machine - continued.
(13)
Remove foot pedal (1) and two clips (2) from
round bar of folding stand (3). Stow in box No.
3.
(14)
Loosen wingnuts (4) and remove table (5) from
the stand assembly (6). Tighten wingnuts (4) on
carriage bolt (13) with flatwasher (14) installed.
Stow table (5) into unit where marked 261-2.
(15)
Loosen wingnuts (7) at each corner of the stand
assembly.
(16)
Remove cross brace (8) on rear of stand and
secure to base with two bolts (9), two
flatwashers (10), two lockwashers (11) and two
wingnuts (12).
(17)
Press in on the sides of the stand and fold the
stand down. Secure with strap.
2-108