TM 10-3530-207-14
2-18. PREPARATION FOR MOVEMENT - continued.
g.
Disassembly of Darning Sewing Machine - continued.
(10)
Remove rubber cap (20) from the top post (17).
(11)
Remove two thread clips (19) on posts (8).
(12)
Remove screw (14), lockwasher (15), nut (16), and thread guides (18) from top post (17).
(13)
Remove two screws (14), two lockwashers (15), two nuts (16) and top post (17) from bottom post
(16).
(14)
Remove screw (14), lockwasher (15), nuts (16) and cone rest (13).
(15)
Remove two cushions (12), two pads (11), two nuts (10), two lockwashers (9), and two posts (8)
from the cone rest (13).
(16)
Loosen two setscrews (7) and remove bottom post (6) from unwinder base (5).
(17)
Remove three machine screws (4) and the thread unwinder base (5) from table (3).
(18)
Remove two machine screws (4) and bobbin winder (2) from table (3).
(19)
Remove the light assembly (1) from the table top by loosening the thumbscrew on the bottom of
the clamp. Stow the light assembly in box No. 2.
2-110
