TM 10-3530-207-14
2-18. PREPARATION FOR MOVEMENT- continued.
g.
Disassembly of Darning Sewing Machine - continued.
NOTE
"S" hook on lifter chain will need to be removed for disassembly.
(20)
Remove lifter chain (14) from machine head lever and foot pedal (1). Stow lifter chain (14) in
box No. 4.
(21)
Remove three hinge screws (10) from the darning machine head (9). Place darning machine
head (9) in the tray marked 207. Secure with strap. Slide into the unit where marked by 207.
(22)
Remove four bolts (6), four washers (7), four nuts (8) and darning machine base (4) from table
top (5) and stow in box No. 1.
(23)
Remove pedal (1) and clips (2) from the round bar on the stand (3). Stow in storage box No. 3.
(24)
Disconnect one end of foot treadle rod (15) to the foot treadle (16) by removing flatwasher (17)
and nut (18).
(25)
Remove foot treadle rod (15) from clutch arm (19) by removing flatwasher (20) and nut (21).
(26)
Remove treadle (16) and two clips (22) from the round bar (3) of the stand. Stow in storage box
No. 3.
(27)
Disassemble the stand in accordance with paragraph 2-18f, steps (15) through (17).
2-111
