TM 10-3530-207-14
2-18. PREPARATION FOR MOVEMENT - continued.
h.
Disassembly of Clothing Sewing Machine.
(1)
Remove tightening nut (25) and top post (21) from bottom post (10).
(2)
Remove wingnut (24) washer (23), clip (22), thread guides (20) from top post (21).
(3)
Remove two thread clips (19), two cushions (18), two pads (17).
(4)
Remove cone rest (12), two nuts (16), two lockwashers (15) and two posts (14).
(5)
Loosen setscrew (13) and remove cone rest (12) from bottom post (10).
(6)
Remove nut (11) and post (10) from thread underwinder base (9).
(7)
Remove three machine screws (8) and thread unwinder base (9) from table (3).
(8)
Remove bobbin winder (7) and belt guard (6) from table (3) by removing two machine screws (8).
(9)
Remove belt (5) from motor pulley by tilting
the machine head (2) back.
(10)
Remove head pin (26) from table top (3).
(11)
Remove the light assembly (4) from the table
top (3) by loosening the thumbscrew on the
bottom of the clamp. Stow the light assembly
in box No. 2.
(12)
Remove hinge pins (1) from the sewing
machine head (2). Stow hinge pins in box
No. 3.
(13)
Remove sewing machine head (2) with belt
(5) from table (3).
(14)
Place Clothing Repair machine head (2) into
tray marked CN3115R. Secure with strap.
Slide into the unit marked for CN3115R.
2-112
