TM 10-3530-207-14
2-18. PREPARATION FOR MOVEMENT- continued.
i.
Sewing Machine Table Assemblies, Folding Stands and Stowage Boxes - continued
.
(4)
Slide the eight sewing machine table
assemblies (1) into their respective slide
racks inside the cabinet.
NOTE
Swivel foot of the locking clamps have
left hand threads.
(5)
Insert and screw the locking clamps into
place.
j.
Folding Table Assemblies.
(1)
Fold the table legs up and lock them in place by sliding the locks upward and swiveling the
clamp and tightening on the wingnut.
(2)
Slide the two table assemblies (6) into the rear of the cabinet. Secure with the two locking pins
(5).
k.
Loading Generator Set. Proceed as follows if generator needs to be loaded.
(1)
Remove holddown bracket (2) by
removing both locking pins (1).
WARNING
The generator set weighs approximately 285
lbs. To avoid injury to personnel, four
persons are required to move the generator.
(2)
Carefully slide the generator set (3)
forward and lift it onto the slide tracks
and into the cabinet. Avoid hitting the
rear door stays (4). Slide generator set
(3) all the way forward.
(3)
Reinstall bracket (2) and two locking
pins (1).
2-115
