TM 10-3530-207-14
Table 4-1. Unit Preventive Maintenance Checks and Services for Clothing Repair Shop.
ITEM
INTERVAL
LOCATION
PROCEDURE
NOT FULLY MISSION
NO.
ITEM TO CHECK/
CAPABLE IF:
SERVICE
TACK
BUTTON
ATTACHING
MACHINE -
continued
42
Weekly
Frame
Inspect for cracked or broken frame.
Cracked or broken
Inspect for dirty surfaces, for loose
or missing nuts and screws, and for
loose mounting to the table. Clean
a dirty tack button attaching
machine (para. 4-63). Tighten loose
mounting nuts. Replace the tack
button attaching machine if any of
the other above conditions exist
(para. 2-18).
43
Weekly
Mounting
Inspect for cracked or broken
Cracked or broken
screws mounting screws. Inspect for
stripped threads. Replace the
mounting screws if any of the above
conditions exist.
44
Weekly
Dies
Inspect the dies for dirty, nicked,
Burred or nicked
burred, or corroded surfaces, and for
bent or broken shafts and springs.
Make certain the dies will fit into
position without mechanical
binding.
Clean dirty dies (para. 4-63). Replace the
dies if any of the above conditions exist.
45
Weekly
Plunger
Inspect the plunger for burred,
Burred, nicked or
nicked, or corroded surfaces; for
binding
mechanical binding, and for loose
mounting. Replace the tack button
attaching machine if any of the
above conditions exist (para. 2-18).
46
Weekly
Pins and locks
Inspect for bent, broken, burred,
Bent, broken or
corroded loose, or missing pins or
burred
lock. Inspect the locks for loose
mounting on the pins. Replace the
tack button attaching machine if
any of the above conditions exist
M-W (para. 2-18).
4-25
