TM 10-3530-207-14
Table 4-1. Unit Preventive Maintenance Checks and Services for Clothing Repair Shop.
ITEM
INTERVAL
LOCATION
PROCEDURE
NOT FULLY MISSION
NO.
ITEM TO CHECK/
CAPABLE IF:
SERVICE
CABINET
ASSEMBLY -
continued
49
Monthly
Panels
a
Inspect panels and exterior of
Cut, loose or broken
cabinet for dirt. Clean dirty
surfaces with general purpose
detergent (Appendix F, Item
11) and water.
b.
Check for cut, broken, or
dented surfaces. Check for
broken welds, loose or missing
rivets and loose mountings.
Notify next higher level of
maintenance if any of these
conditions exist.
50
Monthly
Generator
Check for cracked, bent, or broken
Cracks or missing
holddown
tracks, stops, and holddowns.
pins
assembly
Check for broken welds and loose
mounting of holddown assembly to
floor. Check for missing pins.
Notify next higher level of
maintenance for defective parts.
51
Monthly
Folding
Check slides for broken welds or
Broken welds or
table slides
missing pins. Notify next higher
missing pins
level of maintenance if any of these
conditions exist.
52
Monthly
Stowage
Inspect for dirty, cut, dented, and
Broken
boxes
broken surfaces. Check for loose or
missing rivets and for bent, broken,
or loose handles, hooks, latches, and
hinges. Make certain the hooks and
latches will lock and unlock, and
hinges operate without binding.
Repair stowage box as required
(para. 4-55) for any of the above
conditions.
4-27
