TM 10-3530-207-14
Table 4-1. Unit Preventive Maintenance Checks and Services for Clothing Repair Shop.
ITEM
INTERVAL
LOCATION
PROCEDURE
NOT FULLY MISSION
NO.
ITEM TO CHECK/
CAPABLE IF:
SERVICE
CABINET
ASSEMBLY -
continued
53
Monthly
Sewing
Inspect the tray assemblies for any
Missing or broken
machine tray
cracks longer than 2 inches
straps
assemblies
extending through the full
thickness of the wood or any cracks
in the holddown areas. Check for
missing or broken holddown straps
and tray pulls. Check for cut, torn
or frayed webbing straps. Check for
missing or loose screws throughout.
Check that felt shock absorbers are
not worn or missing, and that
rubber bumpers are not
deteriorated or badly worn. Refer to
paragraphs 4-18, 4-33 or 4-46 for
replacement of damaged parts.
54
Monthly
Sewing
Inspect the sewing machine folding
Missing or broken
machine
stand holddown strap assemblies for
straps
folding
cracked, broken, loose, or missing
stand
footman loops; for missing, loose, or
straps
damaged screws; for cut, torn, or
frayed retaining straps; for loose or
damaged strap buckles, and for
loose mounting. Notify next higher
level of maintenance if any of these
conditions exist. Repair folding
stand (para. 4-32).
55
Monthly
Machine
Inspect the sewing machine table
Broken or missing
table slides
assembly slides for broken welds,
swivel screws
and missing swivel screws. Replace
swivel screws if missing.
Notify
next higher level of maintenance if
table slides are broken.
4-28
