Figure 4-42. Blower, disassembled.

Figure 4-41. Filter head, removing fuel filter head gasket.

Fuel Fittings and Lines

TM-10-4510-201-14 - index
Page Navigation
92

d. Fuel Pump Bracket (Used on Army Models SPE

35, SPE 35A, and SPE 41).

pump bracket (18) to the blower housing (7), and

remove the bracket from the housing.

(1) Removal.

(2) Inspection. Inspect for cracked or broken

(a) Remove the fuel pump (para a (3)

bracket and damaged threads.

(a) thru (e) above).

(3) Installation. Replace defective bracket

(b) Remove the three capscrews (4, fig.

with a serviceable one, and install it by reversing the

4-42) and the lockwashers (5) that hold the fuel

procedure in d (1) above.

Figure 4-42. Blower, disassembled.

model YS49279, however, differs

e. Fuel Pump Mounting Bracket With Stop Pin

from the brackets (18, fig. 4-42)

(Used on Army Models SPE 44, SPE 45 and York

used on the other models, in that

Shipley Model YS49279).

it is removed with the shutter from

the blower housing.

(1) Removal.

(a) Remove the fuel pump (para a (3)

(c) Remove the bracket with the shutter

(a) thru (e) above).

from the blower housing.

(b) Remove the three capscrews (4, fig.

(d) Remove the shutter from the

442) and the lockwashers (5) that hold the fuel pump

bracket (para 4-44b (3) (a) thru (c)), and free the

mounting bracket (1, fig. 4-43) to the blower housing (7,

bracket.

fig. 4-42).

(2) Inspection. Inspect for broken or cracked

NOTE

bracket. Inspect the bracket for broken or missing stop

The capscrews, lockwashers, and

pin and for damaged threads.

blower housing as shown in

figure 4-42 are the same on all

(3) Installation. Replace defective bracket

four Army models. The bracket

with a serviceable one, and install it by reversing the

(1, fig.

4-43) used on Army

procedure in e (1) above.

models SPE 44, SPE 45 and York-

Shipley

4-55

Privacy Statement
Press Release
Contact