TM 10-4510-207-14
(5) Install conduit connector (7) then install conduit, with wire leads inside, into conduit connector.
(6) Connect wire leads to diaphragm (drain) pump (6) using tags and electrical schematic figure 4 -11. Remove
tags.
(7) Install gasket (5), cover (4), and four screws (3).
(8) Connect mating hose end coupling to coupling (2) and secure coupling.
(9) Connect mating hose to coupling to coupling (1) and secure coupling.
(10) Start up the showers facility. See paragraph 2.7.
4-37
